MATERIAL SAFETY Page 01 of 04
DATA SHEET Revision 0
Date Prepared 1/1/2007
                                     
                                   
 
CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
                                     
Product Name Bioriented Polypropylene Film
Chemical Name Polipropilene
SUPPLIER PERMAPACK, INC.
PO Box 38
Lenni, PA 19052
610-358-5621
Customer Service
Tele:  800-784-9119
                                     
COMPOSITION/INFORMATION ON INGREDIENTS
                                     
This product is not hazardous.
                                     
HAZARDS IDENTIFICATION
                                     
POTENTIAL HEALTH EFFECTS
EYE CONTACT:  low hazard for usual and industrial or commercial handling
SKIN CONTACT:  No hazard in normal industrial use.
Exposure to hot material may cause thermal burns.
INGESTION: Ingestion is not expected to occur. No hazard in normal industrial use.
INHALATION: Low hazard for industrial or commercial handling.
WARNING CAUTION LABELS: Not required.
                                     
FIRST AID MEASURES
                                     
Eyes:  Not likely to be an eye hazard in present form
SKIN CONTACT: For hot product, immediately immerse in, or flush the affected area with large amounts of cold
water. Cover with clean cotton sheeting or gauze and get prompt medical attention. Do not remove material
from skin as the damaged flesh cam be easely torn.
INGESTION: Ingestion is not expected to occur.
INHALATION: No specific treatment is necessary since this material is not likely to be hazardous by inhalation.
If exposed to excessive levels of fumes, remove to fresh air. Get medical attention if cough or other
symptoms develop.
                                     
FIRE-FIGHTING MEASURES
                                     
FLASH POINT: > 300°C (600°F)
EXTINGUISHING MEDIA:
Use dry chemical, foam, carbon dioxide or water spray.
Respiratory and eye protection equipment required for fire fighting personnel. .
HAZARDOUS COMBUSTION PRODUCTS: Oxides of carbon. Irritant smoke may be produced.
MATERIAL SAFETY Page 02 of 04
DATA SHEET Revision 0
Date Prepared 1/1/2007
                                     
                                     
                                     
ACCIDENTAL RELEASE MEASURES
                                     
GENERAL PROCEDURES: Stop source of spill. Sweep up for immediate collection and disposal. If material
enter a sewer or water way, notify responsible authorities of presence of non toxic PP films.
                                     
HANDLING AND STORAGE
                                     
GENERAL CONDITIONS: Keep the product in its original package until its effective use.
Mantain in a clean and dry place, protected from the sun and rain.
The pallets are fastened by tapes on pression. When you cut them, use glasses and  gloves protection.
Do not stoarage pallets in piles over 3 units.
STORAGE TEMPERATURE: Preferably mantain in temperatures under 35ºC (95°F).
ELECTROSTATIC ACCUMULATION HAZARD: No, but user proper bonding and/or groundin procedure
                                     
EXPOSURE CONTROLS/ PERSONNAL PROTECTION
                                     
PERSONAL PROTECTIVE EQUIPMENT: wear eye/face protection appropriate for the specific hazard.
SKIN CONTACT:  No hazard in normal industrial use.
RESPIRATORY: If dust, smoke or fume ara generated in processing or handling, wear appropriate
approved respiratory protection to keep concentration below permissible exposure limit.
                                     
PHYSICAL AND CHEMICAL PROPERTIES
                                     
Appearence: solid
Self ignition point 380ºC (716°F)
Flash point 360ºC (680°F)
Solubility in water insoluble
Melting point 158 - 160ºC (316 - 320°F)
                                     
STABILITY AND REATIVITY
                                     
STABILITY: Yes
HAZARDOUS POLIMERIZATION:: No
CONDITONS TO AVOID: Do not store near heat, flame or strong oxidants. Minimize dust generation and
accumulation.
HAZARDOUS DECOMPOSTION PRODUCTS:  Oxides of carbon.
MATERIAL SAFETY Page 03 of 04
DATA SHEET Revision 0
Date Prepared 1/1/2007
                                     
                                     
TOXOCOLOGICAL INFORMATION
                                     
Non toxic and chemically inert.
EYES AND SKIN EFFECTS: No
TARGET ORGANS: None
CARCINOGENICITY, MUTAGENICITY AND REPRODUCTIVE EFFECTS: None
                                     
                                     
DISPOSAL CONSIDERATIONS
                                     
It is recommended that all waste be analyzed for compliance to applicable laws and regulations governing proper
waste disposal and reporting requirements. 
                                     
                                     
REGULATORY INFORMATION
                                     
Chemical Name CAS Number
POLYPROPYLENE HOMOPOLYMER 9003-07-0
COMBINATION OF ANTISTATIC AGENTS NA
ERUCAMIDE 112-64-5
SYNTHETIC SILICA NA
POLYPROPYLENE COPOLYMER 9010-79-1
POLYPROPYLENE TERPOLYMER 25985-47-0
OSHA HAZARD COMMUNICATION RULE: This product does not contain ingredients which are hazardous
according to 29 CFR 1910.1200
CLEAN AIR ACT: This product does not contain substances which are defined as hazardous air pollutants under,
 and subject to the reporting requiremenst of section 301 of Title III of the Clean Air Act Amendments of 1990.
CALIFORNIA PROPOSITION 65: This product does not contain any substance which are defined by the state
of California to cause birth defects or other reproductive effects.
MATERIAL SAFETY Page 04 of 04
DATA SHEET Revision 0
Date Prepared 1/1/2007